Filters and Carbs K&N Filter & , Turbo Cone For , Now for GEO's , Linkage, Gaskets and , Billet Air Filter , Colored Pre-Filters , Replacement Foam

Previous 1 Next Displaying 1 - 22 of 22 Items
Only! $11.99 Dual Stage Pre Filter 3220 Fits: Will fit many aftermarket filters (K&N style) short or tall. This dual stage pre filter is a must have for all serious off road riders. With this Pre-Filter you can run your current filter... Only! $6.99 Colored Pre-Filters 3301 Add a colored pre-filter to your billet filter to not only give your scooter a great look but to protect against all dirt and debris getting into your cylinder. Fits: Billet Air Filters Only Only! $12.99 T-Handle 8060 Fits: Walbro wa603 carbs that have a screw type high adjustment needles T-Handle to replace the screw needle on your "high" needle on the 603 HP carb. Only! $12.99 Billet Carb Linkage 8050 Fits: All HP carb’s found on Go-Ped brand Scooters or just about all Walbro brand carb’s. Tired of those cheap thin linkage plates you have on your HP carburetor, or are you about to buy an HP... Only! $29.99 Billet Filter Lids Only 3214 Ready for a new style, theme or look to your filter? Get one of these hot styles and install it in minutes for a completely new look. Don’t forget you must have a billet air filter already, these... Only! $79.99 GSR HP Carb Kit 8030 Fits: The GSR40 model only The HP carb kit comes complete with Billet Delrin manifold, gaskets, stainless cap screws, HP carburetor with swivel installed and the billet linkage. Get more torque and... Only! $34.99 GSR40 HP Carb Manifold 8035 Fits: GSR40 model scooters only. This GSR40 billet manifold is CNC machined from billet delrin (high quality and high temperature plastic) The manifold uses top of the line threaded inserts to... Only! $19.95 Linkage, Gaskets and Manifold not the carb G2007L This is all the stuff you need to use your high speed Walbro 167A Carb Kit for the Goped G23LH, G2D and G23ORC engines!! This kit does not include the Walbro Carb or K&N filter but it does come... Only! $79.99 G23LH HP Carb 8010 Fits: Stock motors found on Sport and Liquamatic models. This G23 HP Carb kit is the most complete and advance HP carb kit on the market today. With its billet plastic manifold you get a clean... Only! $34.99 Geo/GSR25/GSR Sport HP Manifold 8025 Fits: Geo, GSR25 and GSR Sport CNC machined from billet delrin (high quality and high temperature plastic) The manifold uses top of the line threaded inserts to ensure a tight hold on to your HP... Only! $69.99 Billet Air Filter - Spider 3012 Fits: All Go-Ped brand scooters except Geo, GSR25 and GSR Sport (unless you have an HP Carb) Also fits other Walbro carbs and some carbs found on other brand scooters and mini bikes. ALL new... Only! $89.99 Geo/GSR25/GSR Sport HP Carb 8020 Fits: All Geo Models and the GSR25 and GSR Sport The most complete and advanced kit available for GEO motors. This HP Carb kit is the most complete and advance HP carb kit available for the Strato... Only! $1.50 Replacement Foam 3201 Fits Any Billet Filter Only! $69.99 Billet Air Filter - Flames 3009 Fits: All Go-Ped brand scooters except Geo, GSR25 and GSR Sport (unless you have an HP Carb) Also fits other Walbro carbs and some carbs found on other brand scooters and mini bikes. ALL new... Only! $69.99 Billet Air Filter - Iron Cross 3011 Fits: All Go-Ped brand scooters except Geo, GSR25 and GSR Sport (unless you have an HP Carb) Also fits other Walbro carbs and some carbs found on other brand scooters and mini bikes. ALL new... Only! $69.99 Billet Air Filter - Spade 3014 Fits: All Go-Ped brand scooters except Geo, GSR25 and GSR Sport (unless you have an HP Carb) Also fits other Walbro carbs and some carbs found on other brand scooters and mini bikes. ALL new... Only! $34.99 G230RC and G260RC manifold 8017 Fits: Zenoah G230RC and G260RC motors as well as all clone motors and big bore cylinders CNC machined from billet delrin (high quality and high temperature plastic) The manifold uses top of the... Only! $34.99 G23LH HP Carb Manifold 8015 Fits: G23LH stock motors on Sport, X-Peds and Big Foots This qaulity billet CNC machined from billet delrin (high quality and high temperature plastic) The manifold uses top of the line threaded... Only! $15.99 Geo Block Off Plates 8050 Fits: Geo models, GSR25 and GSR Sport Use these billet block off plates on any Geo motor that is using an aftermarket HP carb. Heat sinks on one side to reduce cylinder temp and ported on the inside... Only! $29.00 K&N Filter & Velocity Stack Adapter G2011C K&N Air Filter Kit with Velocity Stack Adapter - comes complete with everything you need to replace that ugly black air breather with a chrome fully functional and improved intake system. This item... Only! $54.95 Now for GEO's - K&N Filter with tunable v-stack an KNGEO Finally another high performance item for your GEO!! K&N Air Filter Kit with Tunable Velocity Stack Adapter AND CHOKE - comes complete with everything you need to replace that ugly black air... Only! $20.00 Turbo Cone For K&N TURBOC This is a high performance item precision honed from a solid chunk of billet aluminum! Installing a turbo cone is simply the easiest, least expensive way to gain higher top speed. A turbo cone...
Previous 1 Next Displaying 1 - 22 of 22 Items