|
|
||||||||||||||
 |
Goped Common Parts - Replacement Wheels, Spindles, Air Filter Covers, etc.
|
Below you will find the Most Common Replacement parts for your scooter. If you don't see what you want, please contact us and we will endeavor to help you find what you want as soon as possible and at a great price!!
Common Replacement Parts for your Goped Scooters:
Starter Kits. Convenient Starter kits consist of a 1 gallon gas can, (4) packs of gallon mix oil packs, (1) spark plug, (1) replacement wheel and (1) tank cover. These items will get you set-up right away with everything you need to enjoy your scooter for at least 90-days.
- Scooter Starter Kit - Sport Model Gopeds including GEO's
- Scooter Starter Kit - Big Foot Model Gopeds including GEO's
Goped Replacement wheel and tire assemblies. Here are all your stock goped wheel options. From Complete Replacement
wheels which come with a virgin hub and bearings mounted with virgin rubber to only the rubber only tire for your own installation. Your best value is to buy these
puppies by the 6-pack which Edge also offers. Please see our FAQ section for tips on how to properly adjust your
rear wheel to increase the life of your rubber! or to mount rubber on your good hubs. You might also want to check out our 800 High Performance Drive Spindle and 3rd bearing
support which will also be easier on your rubber wear while boosting your top end speed by 3-5 MPH!.
- Goped Replacement Wheel Assembly
- Six-Pack of Goped Wheel Assemblies
- Goped Wheel Rubber Donut
- Six-Pack of Wheel Rubbers
- Big Foot Replacement Tire and Tube
- Big Foot Replacement Tube:
- Boxer Replacement Tire and Tube
- Boxer Replacement Tube
Drive Spindles.
After a long while, you will need to replace your drive spindle. Here is where you can order your stock drive spindle for replacement on your Goped. Please see our Frequently Asked Questions (FAQ) to find out how to easily remove and replace your drive spindle. It will save you a lot of frustration!
- Goped Sport Model Replacement Spindle
- Goped Big Foot Model Replacement Spindle
- Goped Sport Model Replacement Spindle Bolt:
- Goped Big Foot Model Replacement Spindle Bolt
High Performance drive spindles – The long drive is as it sounds, longer than the shorty and designed to ultimately seat into a 3rd bearing support.
This comes
with everything you need for immediate and simple installation. Compare the 800 size spindle to the stock sport size 625 and you will see 30% increase in size which means a
larger spindle is turning the same rpms which means you go faster. This is definately a case where MORE SIZE is a good thing – up to a point. We at Edge recommend that the
largest spindle diameter you should use be an 800. Any larger and your off-the-line performance will suffer. This is a knurled steel spindle not that cheezy stock
replacement spindle that quickly wears down. This is the most cost effective and simple way to gain greater performance from your ped and provides up to 5 mph
greater top-end speed. This is a high performance item for your Sport, Xped. Also great to convert your Liquimatic. (Long Drives do not fit GEO SPORTS but Shorties do!)
- 800 Performance Long Drive Spindle
- 800 Performance Short Drive Spindle (Shorty)
- 650 Performance Long Drive Spindle (outta the hole performance!)
Performance Long drive spindle with 3rd Bearing Support - This comes with the 800 size long drive spindle and a 3rd bearing support
which provides
a solid anchor across your wheel. This enables improved drive performance as well as lets you to catch huge air without breaking your crank shaft. This is a MUST for the serious go-ped race competitor. (*sorry but Geo's and Big Foots cannot support a 3rd bearing*)
Big Foot Goped 750 Long Drive Spindle - This comes with everything you need for immediate and simple installation. Compare the 750 size spindle
to the stock
sport size 625 and you will see 20% increase in size which means a larger spindle is turning the same rpms which means you go faster. This is definately a case where MORE SIZE is a good thing – up to a
point. We at Edge recommend that the largest spindle diameter you should use for your Big Foot be a 750. Any larger and your off-the-line performance will suffer. This is a knurled steel
spindle not that cheezy stock replacement spindle that quickly wears down. This is the most cost effective and simple way to gain greater performance from your Big
Foot and provides 3-5 mph greater top-end speed. This is a high performance item for your Big Foot and GEO BIG FOOT too!!
- 750 Long Drive Spindle for Big Foot
- 650 Performance Long Drive Spindle (outta the hole performance!)
Quick Release Axel Assembly. This is a fairly common replacement item for your Sport, Liquimatic and X-Ped after several months use. Please visit our FAQ section to find how to properly adjust your wheel and the use of this assembly for optimum performance.
Throttle Cable Assembly and Grip Shifter Clutch Cable Assembly. Each Throttle cable comes complete with connections for your kill
switch and rubber sheild to provide further protection from rubbing under your deck. Your throttle cable should last for many years, however Big Air and hard use could find you ordering one of
these every 6-9 months. We also maintain a stock of grip shifter Big Foot and GEO ped Clutch Cable Assemblies.
- Goped Throttle Cable Assembly (fits all gopeds): $15.00
- Goped Big Foot and GEO Grip Shift Clutch Cable Assembly: $19.95
Air Filter Replacement Parts. We offer stock replacement parts for your Air Filter assembly. We have all these parts available complete or
separately since you probably lost some or more of these when you laid down your ped last weekend or accidentally pulled the cover off with the heel of your shoe for the seventh time! Please be careful!!
Please also check out our K&N Air Filter Kit which provides increased performance looks hot!!
NGK Spark Plugs - works wonders for an older ped. Try it out if you haven't replaced your plug in the last six months or if you are having trouble
starting your ped. We have plugs for all kinds of Goped Products. Please make sure you order the correct plug from the selections offered at the following link:
Fan Covers and Starter Assemblies. We carry the stock replacement Fan Cover which you might need if you dropped your ped
down hard on the left side, punching the starter assembly violently into the fan cover. Ouch! The flywheel is probably A-OK but you probably can no longer screw your starter back onto the broken fan
cover. We are sorry that this happens and do hope you are very careful. We have replacement fan covers and starter assemblies always in stock to get you back on the road as soon as possible!
Muffler Connect Tubes:
Do you want to spruce up your scooter for resale? Or, are you tired of the neighbors raggin' ya for the loud noise? You might need a new muffler connect tube to help things along...
Gasket Set for G23LH engine: This set includes all (5) gaskets for your G23LH engine. The G23LH is the engine on the original goped scooters (non-GEO scooters).
Gaskets for your carb, your crankcase, your cylinder and your muffler are included. This is a very handy set to have around for you do-it-yourselfers!
Piston Ring Set: Another nice part available for you do-it-yourselfers! A set of (2) replacement piston rings. Use these on older peds to improve compression and performance!!
